870-206-7507

Balance PAK® 300

Balance PAK® 300
  • Balance PAK® 300

$$$$

GET PRICE
See How it Looks in Your Yard
Request information

Description

BioGuard Balance Pak 300 is a calcium hardness increaser. This product boosts calcium hardness to help prevent equipment corrosion, etching of plaster and wrinkling of liners. It has a unique pelletized formulation which means faster dissolving and less cloudiness. Low calcium hardness can cause staining, etching, or distorting of the pool’s finish. Plaster etched by low calcium hardness will become abrasive and uncomfortable for swimmers. Rough plaster also increases algae problems and makes cleaning more difficult. It is important to keep your pool water balanced in order to get the most effective use out of your chemicals.

Dimensions
  • Filled Weight: 7 lbs
Chemical standard type: Calcium Hardness Increaser
Pool chemical type: Pool Water Balancers
Form: Granules
Rec. use:
 Swimming Pool

About this item

BioGuard Balance Pak 300 is a calcium hardness increaser. This product boosts calcium hardness to help prevent equipment corrosion, etching of plaster and wrinkling of liners. It has a unique pelletized formulation which means faster dissolving and less cloudiness. Low calcium hardness can cause staining, etching, or distorting of the pool’s finish. Plaster etched by low calcium hardness will become abrasive and uncomfortable for swimmers. Rough plaster also increases algae problems and makes cleaning more difficult. It is important to keep your pool water balanced in order to get the most effective use out of your chemicals.

Dosage

1 lb per 10,000 gallons will raise calcium hardness 10 ppm.

Directions

Calcium Hardness in pool water should be maintained in the 175-275 ppm range. Never allow calcium hardness to remain below 100 ppm. Add this product directly to pool water by scattering it over the water surface. Do not pre-dissolve this treatment as heat is generated when this product contacts water. Use surface compatible brush to brush away undissolved granules off pool surface. The addition of 4 lbs. of this product per 10,000 gallons of water will raise calcium hardness approximately 40 ppm. The addition of 10 lbs. of this product per 10,000 gallons of water will raise calcium hardness approximately 100 ppm.

Key Features:

          • Essential pool care: BioGuard Balance Pak 300 (7lb) is a calcium hardness increaser for pools, identified by part #23417BIO.
          • Corrosion prevention: This product inhibits corrosion of pool equipment and surfaces, protecting against deterioration caused by low calcium hardness.
          • Hardness restoration: Quickly raises the calcium hardness level, counteracting problems such as staining, etching on plaster deposits, and discoloration of vinyl linings.
          • Pure composition: The formulation consists of 100% calcium chloride, guaranteeing a direct and effective increase in calcium hardness.
          • Efficient dissolution: Its pelletized formulation allows for faster dissolution and is less likely to cloud the water, simplifying application.
          • Comfort for swimmers: Beyond protecting the equipment, this product also contributes to a higher level of comfort for swimmers.

Features

  1. For raising calcium hardness levels.
  2. Dissolves quickly.
  3. Protects pool equipment from corrosion, plaster etching and wrinkling of liners.

© 2026. Jonesboro Pools + Spas . All Rights Reserved. | Privacy Policy

 

Download Savings List

Get Price